PANZHU Rock Wool Sandwich Panel

SANDWICH PANEL

A.Rock Wool Sandwich Panel with cement mortar outside

Production process of rock wool SANDWICH PANEL with cement mortar outside:

Rock wool board is made of basalt and other natural ores as the main raw materials. Through high temperature and the centrifuge, rock wool liquor is melted into fiber. After adding an appropriate amount of binder, the rock wool fiber was made into rock wool board through curing process.Rock wool SANDWICH PANEL with cement mortar outside is the rock wool board added a cement mortar outside, so that the installation time will be shortened by 70%, which effectively shorten the construction time of the project. Rock wool SANDWICH PANEL with cement mortar outside has the performances of light weight, small thermal conductivity, heat absorption and non-combustion.

ROCK WOOL PANEL

PERFORMANCES OF ROCK WOOL PANEL with Cement Mortar Outside

ROCK WOOL PANEL with Cement Mortar outside has mechanical properties of impact resistance, shear resistance with good integrity. ROCK WOOL PANEL with Cement Mortar outside has the performances of heat preservation, heat insulation, sound insulation, moisture proof etc. Its board length is not restricted, which can reach more than 12 meters. ROCK WOOL PANEL with Cement Mortar outside can fully meet the fire requirements of technical designs. ROCK WOOL PANEL with Cement Mortar outside has overcome the disadvantages of low integrity, low stiffness, low flexural and impact resistance performances of normal rock wool products. ROCK WOOL PANEL with Cement Mortar outside is a high performance external wall insulation board.

SANDWICH PANEL

SIP PANELS

B.Rock Wool Sandwich Panel With Steel Panel Outside

ROCK WOOL SIP PANELS are vertical fiber rock wool board with IBR sheet outside as surface layer. ROCK WOOL SIP PANELS are fire prevention are flame retardant insulation materials with the performances of light weight, heat insulation, sound absorption and better sealing performances.  ROCK WOOL SIP PANELS are easy construction with short construction time. ROCK WOOL SIP PANELS has low comprehensive cost, bending resistance, corrosion resistance, beautiful appearance and other obvious advantages.

STRUCTURAL INSULATED PANELS

ROCK WOOL STRUCTURAL INSULATED PANELS PERFORMANCES

1. ROCK WOOL STRUCTURAL INSULATED PANELS are class A fire resistance product.

2. Thermal insulation, thermal conductivity: 0.044w/m.k

3. High strength, can be used as envelope structure or load-bearing structure. ROCK WOOL STRUCTURAL INSULATED PANELS is bending and compression resistance, and usually used without beams and columns.

4. No need for surface decoration. The anti-corrosion coating of IBR sheet can be used for 10-15 years, and the Aluminum plated IBR sheet can be used for 30-45 years;

5. The construction time can be shortened by more than 40%.

6. Flexible installation of ROCK WOOL STRUCTURAL INSULATED PANELS:

The width of ROCK WOOL STRUCTURAL INSULATED PANELS is 950 cm or 1150 cm. The surface layer can be with ridge or without ridge. The length can be customized according to the customer requirements. The construction time is short. The comprehensive cost is low;

ROCK WOOL PANEL

SIP ROOF  

ROCK WOOL SIP ROOF APPLICATIONS

Widely used in steel structure workshop, simple mobile house roof, wall, Clean Room ceiling and partition.Purification engineering, ship, food, air conditioning, workshop, boiler room, floor, mobile house, cold storage, warehouse, office partition, sound insulation, etc.

 

 


Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

Message :